Mustang Manitou 1050R Skid Loaders

Send Inquiry

*Subject:
*Purchase Time:
*Content:	Mustang Manitou 1050R Skid Loaders floor price
*Country/Region:
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:	- -

Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
Standard high-back adjustable seat and optional air-ride suspension seat or mechanical suspension seat provide enhanced, all-day comfort.
Hydraloc^™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.

Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
Two control options include T-Bar or Hand/Foot.
All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
Hydraloc^™system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.

Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.

42% more visibility with new low-profile lift arm.
Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.

Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
All-new swing-out cooler provides improved access to the engine bay area.
Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
Removable plate for easy cleanout of foot area inside ROPS/FOPS

Dimensions
A. Overall Operating Height - Fully Raised (mm)	139.6" (3546)
B. Height to Hinge Pin - Fully Raised (mm)	107.5" (2731)
C. Overall Height to top of ROPS (mm)	70.3" (1786)
D. Ground Clearance to Chassis (mm)	6.0" (152)
E. Overall Length with 55" Bucket (mm)	114" (2896)
F. Overall Length Less Bucket (mm)	88.9" (2258)
G. Wheelbase (mm)	34.5" (876)
H. Dump Reach at Full Height (mm)	22.8" (579)
I. Rollback at Ground Level	29°
J. Dump Angle	42°
K. Overall Width - Less Bucket (mm)	48.4" (1229)
L. Bucket Width (mm)	55" (1404)
M. Clearance Circle - Rear (mm)	54.1" (1374)
N. Clearance Circle - Front w/o Bucket (mm)	44.1" (1120)
O. Clearance Circle - Front w/Bucket (mm)	69.4" (1763)
P. Seat to Ground Height (mm)	32.6" (828)
Q. Rollback at Full Height	99°
R. Dump Height (mm)	84.5" (2146)
S. Departure Angle	26°
Standard Tire Size	27x8.5x15 HD

Engine
Make	Yanmar
Model	3TNV88C-KMS Tier IV
Gross Power (kW) @ 2800 rpm	34.7 hp (25.5)
Net Power (kW) @ 2800 rpm	33.1 hp (24.7)
Maximum Torque (Nm) @ 1820 rpm	80.7 ft.-lbs. (109.4)
Displacement (L)	100 cu. in. (1.6)
Hydraulics
Auxiliary Hydraulics - Standard (L/min)	14.5 gpm (55)
High-Flow Hydraulics - Optional (L/min)	N/A
Reservoir Capacity (L)	8 gal. (30.3)
Electrical
Battery (CCA)	12-volt (950)
Starter (kW)	12-volt (3.0)
Alternator	40-amp
Capacities/Weight
Rated Operating Capacity (kg)	1,050 lbs. (476)
With optional counterweight (kg)	1,175 lbs. (533)
Fuel Tank (L)	10.4 gal. (39.4)
Travel Speed - Maximum (km/hr)	5.9 mph (9.5)
Operating Weight - Approximate (kg)	4,200 lbs. (1905)